News

Solve the three major reasons and make your toroidal transformer last longer!

Toroidal transformers can be seen everywhere in our lives, and they have a higher cost-effectiveness during use. They are one of the most widely used types of transformers. However, some users have also reflected: "Why can't the toroidal transformer I use be used for many years?" In fact, the toroidal transformer does not have a fixed service life, but it can be roughly judged based on its use and manufacturing materials. Today, EEIO Transformer will tell you how to make our toroidal transformers have a longer service life.

1: Do not use overpower frequently

When users buy toroidal transformers, they must actually test the actual power required by the machine, rather than guessing how many watts the toroidal transformer should be according to their own ideas. Instead, they must fully consider the margin of the machine. Otherwise, it is easy to cause the toroidal transformer to burn out due to overpower use.

2: The input voltage should not be too high for a long time

Let's take an example. If a toroidal transformer is rated for 220V, the user is connected to a voltage of 260V. Since the connected voltage is more than 10% higher than the rated power of the toroidal transformer, the primary coil of the transformer will heat up too quickly, which will shorten its service life and cause damage. It should be noted that when ordering a toroidal transformer, the user must determine the mains voltage of the area where the toroidal transformer is used. Not all power grids have a stable voltage of 220V.

Three: Do not cause artificial damage

This sentence is easy to understand. We should not modify or disassemble the structure and components of the toroidal transformer. Not everyone realizes that the toroidal transformer is a consumable item. In fact, the toroidal transformer is very easy to break. If it is accidentally bumped during installation or use, falls off the table, is pressed by heavy objects, etc., this may cause the copper wire inside the toroidal transformer to be scratched or broken, causing failure or burning.

In the process of using our toroidal transformer, as long as everyone pays attention to these three points, our transformer will maintain a stable and safe operation. There will be no many problems in the use of the toroidal transformer under this normal operation for more than ten or twenty years. Everyone must believe in the strength of our EEIO Transformer. 15 years of focus on high-quality toroidal transformers, choosing EEIO Transformer is choosing a good toroidal transformer.